Showing posts with label wardrobe. Show all posts
Showing posts with label wardrobe. Show all posts
Goddess wardrobe by PAX
Materials: PAX, wood, drill ,curtain rod,curtain, wall plugs and screws
Description: I loved the PAX wardrobe range but it was too expensive and not big enough.
Plus I hate having sliding doors on my wardrobe as you can't see all the clothes at once.
So I set about my challenge
1. I measured the height and width of my space.
2. I listed my requirements e.g. whether I need more long hanging space or short hanging space.
3. The PAX hanging rails come in 3 sizes 50cm, 75cm or 100cm so I divide my space using these measurements.
4. I bought two pieces of wooden melamine panels and four wooden battens that were all up to ceiling height.
5. I screw the battens to the wall (after pre-drilling and installing wall plugs) and slid the wooden melamine panels in-between.
6. I then used the pax wardrobe rails to create the storage.
and voila, it was done!
I completed my design by installing a full curtain track across the front and adding some beautiful full length voile curtains for the Goddess effect!
~ wisewoman365, london
PAX Wardrobe Turned Custom Reach in Closets
Materials: Pax wardrobes (1 large, 2 medium and 1 small), Various komplement peices and pax bergsbo / frosted glass doors, Martha Stewart living Paint #MSLO29 "glass of milk", poplar moldings 1x2 and 1x3. Crown molding 1x 5/16. Plaster, paint, Hammer, Screwgun, Level, Screw Driver
Description: I converted a basic reach in closet in a small bedroom into two stunning custom closets that look like a $5000 custom "California Closet" systems. One large closet in the bedroom and one small linen closet in the hallway.
The Original closet was 7' wide and 2'6" deep. The bifold door opening was about 4' wide and 80" tall. I completely gutted the closet down to the studs including the walls, ceiling and the framing around the closet door.
I cut out a space in the hallway to the right of the original closet space, framed in and finished a cove 20" wide, 79"tall and 16" deep. In that cove I installed a small pax wardrobe,(pax wardrobe 598.418.77), the wardrobe fits perfectly after i cut off 8" from the back. I finished it by applying a 1x2 poplar molding around the wardrobe, adding a pax bergso / frosted glass door and matching paint framing it in giving it a complete streamline look.
Back to the bedroom, I applied drywall (sheetrock) on the walls and ceiling making the closet space flush with all the room surfaces. The open cove dimensions were 79"w, 95"h (same as ceiling) and 23" deep.
I inserted pre assembled pax wardrobe frames into the cove, one large pax wardrobe frame (700.140.13) and two smaller pax frames (100.140.30). I shimmed the frames so they all lined up evenly and then secured them to the wall.
I made the wardrobes look more complete and custom by adding 1" x 3" poplar molding around the room and under the closet, on the front. Also across the top flush with the closet. I also added the crown molding in the room across the top of the closet achieving the streamline custom look i wanted. The molding was painted with Martha Stewart living Paint #MSLO29 "glass of milk".
All of the moldings were painted with "Martha Stewart" Paint (MSLO29)"GLASS OF MILK", it matches the Pax "bergsbo" doors perfectly creating a dramatic style.
~ Ilir Bitici, Berkeley Heights, New Jersey
Pax with yesterday's news
Materials: Pax
Description: I decided to decorate the back of my Pax Tonnes with newapaper from the 60s and 80s. It took a weekend to cover all 200x236 cm.
~ Samuele Orsini, Italy
Walk through my Pax doors!
Materials: Three single Pax doors, gypse and screws...
Description: Simply installed three single Pax doors in front of my walk-in. Two of the doors are fixed into the floor, and the third one can glide either on the left or on the right... The lights are doing the rest of the job!
~ Olivier Visentin, Montréal, Canada
Wardrobe hiding wires and fuse
Materials: Billy, Besta, Tombo doors, Grundtal rails, brackets and hinges from hardware store
Description: In our 1903 apartment we were facing the typical problem of an ugly surface-mounted fuse box that we wanted to hide. As the ceiling is quite high, we couldn't find a piece furniture tall enough. So we took a Billy bookcase (79 1/2", 202 cm tall) and fixed it to the wall with metal brackets.
The fuse box is now hidden behind a Tombo door. All the extra wiring for the wifi-hardware is behind the door we built from one of the Billy shelves that we didn't need anymore.
To complete the wardrobe and get space for all our winter gear and helmets we hung a Besta shelf-unit/height extension (47 1/4", 120 cm wide) next the Billy, also with Tombo doors. The Besta had to be turned upside down because of the holes for the feet. The rod is made of two Grundtal rails. The Trones shoe storage makes the all-white wardrobe perfect. Unfortunately IKEA has discontinued the white Trones.
~ Jochen and Edith, Germany
EXPEDIT wardrobe with plants
Materials: Wxpedit, Dampa, Bigarra, Ikea plants
Description:
1) Assemble 4x4 EXPEDIT with only one vertical row of shelves on the left and without the bottom.
2) Before adding the right vertical panel put in two screws that stand out half an inch to hold the DAMPA curtain rod.
3) Cut the rod to the right size, put it in place, add the right panel.
4) Add three EXPEDIT inserts with doors on the left.
5) Add the plants in BIGARRA pots on top.
Assembling it is faster than assembling the whole Expedit.
This wardrobe is great to create a semi-transparent division between entrance and living room.
~ imaia, Vancouver
Fixing the PAX Sliding Door
Materials: Pax
Description:
I wanted to share my hack because I thought it might give a few people with broken panels in their sliding doors hope. In efforts to save money on my wardrobe, I purchased my PAX used off of Craigslist. I saved $1,500, but had the problem of a door front that wasn't to my taste (the black EIKESDAL) and a glass panel that was shattered (IKEA doesn't sell replacement panels).
To fix the problem, I simply bought enough upholstery fabric to cover the panels, had a thin piece of plywood cut to the same size as the glass panels, and used duct tape to keep the fabric. After painting the "wooden" portions white and assembling the door, I ended up with a great wardrobe at a fraction of the price!
Here's more about how I made the doors and my finished wardrobe all put together.
~ Kasey
Refitting an attic room - storage and room divider
Materials: Pax and Bergsbo
Description: Objectives : designing and planning our attic room with storage (many for Mrs !) and a little office zone.
Initial situation : 25 sq metres without any divider and without any storage
IKEA Materials :
-2 Pax wardrobes in 100 x 240 cm
-1 pax Add-on corner unit (240 cm)
-3 Pax wardrobes in 50 x 192 cm
-5 Bergsbo doors
-1 mirror door
Other materials
-A door
-milled panels
-insulation plates (wool and hemp)
-many battens
Steps
1. Assembling and fixing against the wall the 2 huge Pax wardrobes and the Pax Add-on corner without forgetting technical shaft (phone, electricity and ethernet)
2. Fixing battens on the back of pax wardrobes vertically and up to the ceiling
3. Fixing the door with battens
4. Mounting the wall with milled panels without forgetting to put insulation plates between battens
5. Finishing the wall with milled panels
6. Reshaping of the 3 192 cm pax wardrobes to fit under the roof and fixing against the wall
7. Reshaping Bergsbo doors and fixing
Here we are ..... many many storage and a really nice and insulated divider !
~ Madotter, Paris region
Subscribe to:
Posts (Atom)




















