Showing posts with label Vika Amon. Show all posts
Showing posts with label Vika Amon. Show all posts
Recipe Bar/ Planning Desk
Materials: Ikea Vika Annefors, Ikea Vika Amon, Ikea Capita Legs
Description: I like to cook and have amassed a large collection of cookbooks over the years. We had been looking for a way to make a Recipe Bar and/or Kitchen Planning Desk for a while, but we didn't want to spend a lot of money. This is where the IKEA as-is section came to the rescue.
We started with the Vika Annefors storage piece and simply elevated it to bar height by attaching Capita legs. Then we attached the Vika Amon tabletop. The tabletop was cut short to our desired length and then a 2x2 was used as a ledger board to secure it on the wall.
Ta-da! Instant planning desk and recipe storage! Thanks to the as-is section, we spent a grand total of $60 on this project. We still need to add some trim and finishing touches, but we still really really love it.
~ Heather Conley, Newport, KY
Labels:
kitchen,
Vika Amon,
VIka Annefors
Lack and Vika Amon Sideboard
Materials: 4 LACK side tables, 1 VIKA AMON table top
Description: The LACK side tables were assembled first and 2 of them were attached using L flat brackets to form one row. Next, they were attached to the VIKA AMON table top using eight 2.5" screws with washers.
They were placed upside down to use my weight to clamp them down firmly.
Once the VIKA AMON table top were attached, it was time to attach the lower row. I used flat metal brackets from GORM to fix them together. One is used on each leg at the back side. 2 pieces were also used to further strengthen the hold between the VIKA AMON top and the tables.
Since I plan to have plaster or gypsum boards covering the sides and back of the sideboard, I used L brackets to attach the top and bottom row, facing inwards. In the picture they look brass, maybe they are.
This is my first wood project since I was in high school so I'm proud of it even if it's very simple.
Enjoy!
See more of the Lack and Vika sideboard.
~ Ady Romantika, Malaysia
Computer table with shelf for printer
Materials: Besta, Vika Amon, Lansa, Vika RunTorp, Inreda
Description: The Besta and Vika Amon table top are combined as one. As a cord storage, the Lansa handle was used. The printer shelf is extended via an Inreda pull out frame and standard shelf.
~ Albert Einstein, Austria
Labels:
Besta,
Vika Amon,
work station
Vika corner desk and banish cable clutter
Materials: 2 Vika Amon tables, 7 Vika Curry legs
Description: (This "hack" combines 2 hacks seen here and here at IKEAhackers)
Goal: Remove 1 table leg at inside corner, stabilize with steel plate and organize computer cables rat nest
For desk:
drill, hole saw drill bit
hack-saw
2 "as-is" Vika Amon tables $10 each
7 legs @ 5$ each
1 steel plate ~ $7 at homedepot
14 screws
For cables:
cable management "grommet"
cable ties
wire basket $5 at staples
plastic electric cable organizers to attach basket to table
cable sleeve
PATIENCE!
1. Turn tables upside down
2. Remove inside table leg
3. Position steel plate (lumber connector from Home Depot) longitudinally across seam. Pre-drill holes. (I did 7 on each side)
4. Screw in
5. Flip over
6. Drill out hole for cable grommet
(used a "hole saw bit" to start the hole, then a hack-saw to finish the hole
7. Insert cable grommet
8. Cover bottom of hole with tape to protect wires (for now)
For the cable organizing portion....
1. Mount power strips on the wall
2. Pre-drill 4 holes for wire basket
3. Screw in 2 screws for basket,
4. Fill basket with routers, etc
5. Screw in remaining 2 screws
Voila.
~ gmxray, Boston
Labels:
Vika Amon,
work station
Standing Desks on the cheap
Materials: VIKA AMON, PVC, Drill Press
Description: Two inch PVC fits the outside dimensions of the VIKA legs perfectly. At our coworking space, we converted 3 desks to be standing height for the cost of 2 10' sections of pipe, and 8 bolts with nuts. A drill press made creating the holes easy and we even made 5 holes on each leg so they are adjustable.
~ Jacob Sayles, Seattle, WA
Labels:
Vika Amon,
work station
Basic IKEA Tabletop into Custom Workstation
Materials: Vika Amon top, Vika Amon legs, Antonius shelf
Description: Turn a basic IKEA desk system into a custom built in workstation using the same construction technique that IKEA uses to create its own pieces.
See instructions for the custom DIY IKEA desk.
~ Chris Gardner
Labels:
Vika Amon,
work station
Wide Standing Desk
Materials: Vika Byske Legs (5), Capita Bracket (2 packs), Lack shelf, Franklin 29' Barstool, Vika Amon Table Top
Description: I was just poking around one evening and I came across the motorized standing (adjustable height) desk for around $600. I knew about standing desks
After a long search for a wide and inexpensive standing office desk, I have decided to combine the following items together: Main desk area is a Vika Amon Table Top 79"x 24", legs are adjustable Vika Byske (5) - I was worried how sturdy these will be at 40" high but they end up working out great.
Now I just needed to figure out a stand for my mac and a monitor. Voila Capita Braket and a Lack 75"x10" wall shelf. Standing ergonomic table is done. Well thanks to my husband who put it all together for me.
I have also purchased Franklin 29" bar chair to sit down when my legs get tired. $29 beats the $600 for the price of the motor to put the table up and down.
Today is day 1 of my cool new desk and I love it. I already feel more productive. I will be glad to answer any questions.
PS: Did you notice that all Ikea workers have a standing desk? :-)
~ Martina, Tampa, Florida
Labels:
Vika Amon,
Vika Byske,
work station
Foldable LAN party tables
Materials: VIKA AMON/VIKA CURRY, hinges, brackets, chipboard, rubber bushes, rope, buckles
Description: At LAN-parties, tables and space are limited. My husband and his gamer friends went table hunting at IKEA and my guy came home with two neat and price worthy tabletops "VIKA AMON" (100x60 cm) and eight "VIKA CURRY" legs.
He takes them with him every time they throw a party, but since the tables were still a bit bulky to carry, he started modifying them. The goal was to fold the table into a "portfolio", with room for the legs inside!
First he cut the tabletops in halves. The tables are hollow with cardboard inside so they needed to be reinforced, and the cut surfaces smoothed. He used chipboard for this purpose.
He then mounted hinges on the backs of the tabletop pieces. Since he wanted to store the legs inside the fold, he used brackets to extend the hinges and make more room, and he attached rubber bushes to keep the legs in place. Handles were made out of rope, and the folded table is kept folded with buckles.
The tables turned out GREAT, and they are very useful - for all types of indoor parties.
Check out the entire description at here. (in Swedish, but if you paste the link in Google translate you'll understand most of it).
See more the Foldable LAN party table
~ Sofia, Sweden
Lift coffee table
Materials: VIKA AMON
Description: I made a coffee table lift (# 1) using a VIKA AMON plate and a trestle (in any hardware store) which I adapted some curtain rods to make it slide (# 3 and #4). So I can transform it into a table to eat (# 2)
~ Noëlle, BOURG EN BRESSE - FRANCE
Cheapest home studio desk ever!
Materials: Vika Amon, Vika Curry, Capita, Lack
Description: I had no room for any of my equipment in my small home / project studio. As you can see from the before picture, everything was just piled up in 2 old desks and the wires were everywhere.
I decided I needed a new desk. I was going to buy one online for around £400, but after coming across this site, I decided it would be a whole lot cheaper to build it myself, and it was, almost 10x cheaper!
I used a VIKA AMON table top combined with 4 VIKA CURRY legs for the main desk base. However, the problem with this was that i didnt have enough room for my keyboard and my monitor. I decide to build another shelf using 1 LACK wall shalf and 1 pack of CAPITA legs. Now there is room for my keyboard, my monitor and my speakers, with room left over!
The great thing now it that I don't need to move everything around to use certain equipment. It's all there ready for me. Most of the wires are also hidden underneath the desk, with exception for my USB hub and wireless mouse base!
1 x VIKA AMON Table top - £20 ($31.69)
4 x VIKA Curry - £8 (£12.67)
1 x LACK Wallshalf - £9.99 ($15.83)
4 x CAPITA legs (1 pack) - £8 ($12.67)
Total: £45.99 ($72.86)
~ Simon McKeon, England
Labels:
Vika Amon,
Vika Curry,
work station
Trofast Children's Craft Table
Materials: TROFAST Frame, VIKA AMON table top (L: 40 1/8"), 2 GRUNDTAL rails, 2 MALA paper rolls
Description: I wanted a craft/drawing table for my two kids, which would also store all of their materials.
I have two kids, so I needed a table that can be accessed from both sides. I didn't want a big table that would use up a lot of space in the living room either.
I wanted to use the smaller VIKA AMON, but 22" high TROFAST frames came in only single or triple sections. So I had to cut one section of it.
1. Partially (only two sections) assemble TROFAST.
2. Cut the extending wood, beyond the second section, preferably, with an electric saw.
3. Add the bottom panels and cut them as well.
4. Put the outer side panel on the top of the inside panel, so that the height on both sides will be even.
5. Install the GRUNDTAL rails on VIKA AMON. In order to fit them and still be able to unscrew the pipe to put on a roll, you have to cut the pipes about 1.5" both. Before cutting the pipes hammer the part where you put the screw in inside the pipe, a little bit more than 1.5" back.
6. Fasten TROFAST onto VIKA AMON with screws. We used 10 wood screws.
7. Put the MALA paper rolls on.
8. Put the drawer rails in and insert the drawers.
We actually screwed the tabletop on before installing the GRUNDTAL rails. Later we had to move the tabletop a little bit to the side so that the rail holders would fit on the other side.
The table is very stable. It is a little bit higher that an average children's craft table since total height is 22"+1 5/8".
Final Steps:
1. Introduce the new craft table to the kids
2. Make sure they learn to put away their papers, materials and scraps into the drawer bins.
Optional 1: You can make a bigger table with larger VIKA AMON table top (L: 48 3/8') on top of a complete TROFAST frame.
Optional 2: You can put LEGO base plates on the table and use it as a LEGO workstation as well. I am thinking about adding this feature on by gluing baseplates on a thin plywood I got from IKEA as-is dept and fixing it to the table top with hinges, but I think it will be too much. Maybe I'll just make it and keep it separate/portable.
See more of the children's craft table.
~ Pratik Anne, Chicago, IL, USA
VIKA desk goes glam
Description: My bedroom has various wood finishes represented and I wanted a desk that would look modern and incorporate multiple finishes. I also wanted it to look expensive...and of course I had only a small amount to spend.
When researching /browsing IKEA hacker, I came across the rustic stool seen here.
The burning technique looked cool but a little too light still so I chose to stain and finish for a shine.
Materials:
IKEA items:
VIKA Amon unfinished pine desktop 47x23
VIKA LEIF desk legs
KASSETT boxes, white
Non-IKEA Items:
face mask for dust and fumes
sandpaper, fine and medium grit
rag
small blow torch
1 special-ordered glass top
4 special-ordered glass shelves
8 L-brackets
1. So to begin I sanded the entire top and sides of the desk to rough up the surface for burning (medium grit). I didn't worry about the underside since it's not visible.
2. Turn on the blow torch (local hardware store - $25). This part was nerve-wracking until I started, then it was AWESOME. Very little threat of messing up your project since you sand it all anyway.
3. Lay the torch at such an angle that the flame licks across the surface as you move horizontally. The sap will rise up and burn a bit but don't worry. It's sand-able. Don't go too light with the burning cause it gets dramatically lighter as you smooth the surface with fine sandpaper. I did the whole table twice with a sand in between and one at the end.
4. Then with a wet cloth, I wiped it down and started the staining process. I did two coats of a honey gold stain. Then I sprayed two coats of gloss which must dry in between coats. I stopped when the shine was good (not perfect as I knew I was using glass in the end). Don't kill yourself.
5. I assembled the legs and measured the inside spaces for the glass. Ordered from an online dealer and picked up 2 days later. $120.
6. Measured the same height up on each leg for the L-brackets. Used a level before drilling anything. measure. mark. measure. Level. drill.
7. Placed the bottom shelves on the base, placed the elevated shelves on the L-brackets. I used the KASSETT boxes to hide all my electronic wires since it has the openings at both ends to keep it all cool. And voila! My new desk incorporates a modern feel with the mixed wood finishes and the color is rich. I'm in love.
~ Kelley, Conshohocken, PA
Labels:
Vika Amon,
work station
Subscribe to:
Posts (Atom)

































