Sleek Stainless Steel Bird Feeder

Materials: Lansa Handle (21 7/8") $9.99, BLANDA BLANK Serving bowl(5"), Drill, Drill bits, screwdriver, pliers $2.99

Description: Start by drilling drainage holes in the bottom of the bowl.
Then drill a hole in the top just below the rim. In order to use the screws that come with the handle you will have to shorten it with the clipping blades on your pliers.

Thread the screw thru the hole below the rim of the bowl, then the extender piece then into the handle as far as it will go. Mark the screw at the excess point. Disassemble and cut the screw, you may have to make small nips to the tip of the screw to get a clean tip to thread into the handle's hole.

Reassemble if the tilt of the bowl bothers you you can insert a shim below the screw (small piece of wire, plastic etc.) however this will cause a small gap where the horizontal arm meets the bowl. I left my as is.

Insert into the ground, fill with bird seed and enjoy your new best friends as they come to visit!

~ Bambi

Coat Hanger Shelf Luxury Version

Materials: 2 Grundtal Haklei (60176925), Lansa handles 25cm (60138759), Galant board (60080541), 2 metal brackets, 2 screws

Description: A small hack inspired by the "Coat Hanger Shelf" posted some weeks ago plus a walk through IKEA.

The GALANT board was cut from 40x80 to 34x80. Grundtal Haklei is attached on the right and left side. Here you need 2 screws that are a bit longer than the original ones in order to attach them to the board. At the front you can see the LANSA handles for the coat hangers. Everything else is pretty easy: After attaching everything to the board, mount it on the wall using two or more metal brackets.

See more of Martin's coat hanger shelf.

~ Martin, Brunswick, Germany